The Lesser-Known Benefits Of Ghost Immobiliser Problems
Protect Your Pride And Joy With The Ghost Immobiliser
Ghost Immobiliser will safeguard your valuable possession from theft. It's discreet and does not require additional key fobs.
The device uses existing buttons on your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence that can be up to 20 presses. This will then allow your vehicle to start.
Simple change of PIN code
With the growing rate of vehicle theft, a lot of owners are seeking to improve their security. There are a variety of aftermarket security devices including tracking systems, alarms and immobilisers. However, not all of these are equally effective in protecting your car. A tracking system can aid in finding your vehicle if it's stolen, but it will not prevent the crime. Immobilisers, however, do exactly what they state on the tin - they shut down the motor of your car to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it virtually impossible for thieves steal your car.
The ghost device utilizes the buttons on your car to create a unique sequence which must be entered to allow the engine to start. This can be accomplished by using the heater, window or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the need to use the button sequence. This feature is particularly beneficial if you have to hand your car over for valet parking or servicing because the immobiliser is activated and not disabled.
The ghost 2 immobiliser fitting near me is a truly unique and ingenious device that works in conjunction with the buttons of your car rather than being a standalone unit. This means that it's not just a powerful protection against theft of your vehicle, but it can also be transferred to any future vehicles you may have, making it more of an investment than the traditional lock on your steering wheel.
Weatherproof tiny device
The autowatch ghost immobiliser fitting (reviews over at championsleage.review) ghost immobiliser is a high-tech security device that protects your vehicle from key cloning, hacking & ECU swapping. It is a weatherproof tiny device that communicates directly with your vehicle's ECU via the CAN data bus, which disables the engine. It can be installed in the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also indestructible to jamming devices, which is an approach used frequently by thieves to get around the immobilisers in place.
The advantage of CAN data over traditional systems is that they operate silently. It can't be detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by traditional diagnostic tools. The Autowatch ghost immobiliser installation does not use LED indicators and instead uses buttons in your vehicle, such as the steering wheel, the centre console, or door panels, to create a unique disarming sequence. You can even make this sequence up to 20 presses long to increase security. The iPhone app is limited to one connection, using a unique pairing code for the Ghost. All communication between the two devices is encrypted.
The Ghost also prevents thieves from stealing a new key or replacing the ECU to bypass the immobiliser and start the engine. The engine will only start only if a valid PIN is entered. It is possible to operate temporarily in the Valet/Service mode (with parameters set such as a 30mph speed limit), so you can offer your vehicle to a valet or service without needing to enter the code.
Every vehicle is tested
The Autowatch Ghost is the first aftermarket CANbus immobiliser. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device snoops on electronic signals to block the system of your vehicle from running its normal start-up routine until you input an individual passcode. The system can be turned on and off using your own smartphone application without the need for autowatch Ghost immobiliser Fitting wires.
Standard factory immobilisers on automobiles function through a transponder built into the key, which sends an indication to the ECU. If the correct code is transmitted the car will begin however, if the transponder is replaced by one from another vehicle the immobiliser cannot recognize it. This allows the vehicle be stolen and started. The Ghost immobiliser was developed by an South African company at the top of the line in vehicle security technology. It guards you against key cloning or hacking, and even key theft. Only by physically towing your vehicle away could a thief get it and not be able drive it.
Ghost makes use of buttons on your vehicle, like the indicator stalk, the steering wheel, as well as the doors, to generate an individual PIN code that needs to be entered in order to use your vehicle. It does this without additional hardware, like keys fobs. It can take up to 20 presses. It is also unrecognizable by devices for diagnosis and transmits radio frequency signals, so thieves cannot use sophisticated RF scanners or code-grabbing techniques to determine if the system has been set up.
Ghost is harder to remove than car alarms, which require disarming with a series of buttons. This makes it a perfect alternative to a GPS tracker which helps locate your car after it's been stolen.
Emergency PIN code override
You do not have to look far on social media to find stories or videos about cars that were stolen using the latest technology tools. This includes key-cloning devices and hacking devices that allow you to start your car ghost immobiliser without the original key fobs.
Our Ghost immobiliser combats this and provides you with an additional layer of protection to stop your vehicle from being stolen when it is targeted by thieves. It generates a unique pin code by pushing the buttons on your steering wheel, door panel, and on the centre console. This unique PIN has to be entered in conjunction with your original key fob in order to prevent the vehicle from starting. The unique override pin can be located on a black card that you receive following the installation. It is simple to remember because there aren't any LED indicators.
The device is hidden within the vehicle's wires and doesn't emit any radio signals, so it cannot be detected by modern criminals with diagnostic software that can identify the security system you have installed. This makes it a great alternative to an electronic device for tracking.
Unlike other security systems, which use a relay in engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to disable the vehicle completely by sending an electronic block of commands to both the ECU and the engine.
These systems can also be connected to a separate alarm immobiliser or tracker. This must be specified prior to installation. They are also fully service/valet mode-compatible and a great alternative to a tracker when you have your car checked for an electrical fault at the dealer.
Service/Valet mode
In recent years, there has been a rise in the number of vehicles being stolen from owners without keys. With the ease of access to key cloning equipment & door lock pick sets, it is now easier than ever for thieves to take your prized possessions. To stop this, we are now offering the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been copied or your vehicle was stolen.
It connects directly to your cars ECU (Engine Control Unit) via the CAN data circuit. It's completely silent because it does not utilize radio frequencies or key fobs. This means that it can't be detected by diagnostics or other car hacking devices. It also protects the user from using an ECU or key to circumvent the system, as only the PIN code allows the engine to start.
The device is hidden within your car by using buttons on the steering wheel, centre console and door panels. A unique and reversible PIN code sequence that can be as long as 20 digits must be entered prior to being able to start your car.
This is the first aftermarket CAN bus immobiliser to be developed that can prevent your car from being driven away or started without a PIN code being entered first. If the device is armed and you try to drive away, it will display an indicator on your dash, which will flash continuously for about 300m. If you enter your PIN code at this point, it will disarm the anti-hijack and your car will continue to operate as normal. If you do not enter your PIN at this point, the indicator will continue to flash and will require a new PIN code for every attempt to start your car.